亲朋手机话费短信充值

AmetekHaydonKerk AmetekAMS

Size 17 (43000)

Dual Motion Size 17
See a Dual Motion linear actuator in action to fully understand what dual motion means and see a few examples of applications.
The Haydon Kerk™ 43000 Series (Size 17) of dual motion actuators are available with a limitless number of operating parameters allowing each device to be custom manufactured according to customer specific application requirements. Linear motion can be optimized based on a variety of lead screw resolutions yielding linear travel ranging from 0.0015mm to 0.0487mm per step. Rotary motion is achieved with either 1.8° or 0.9° step angle motors in both single and double stack.
  • Specifications - 1.8° Single Stack (Linear or Rotary) +


    Series
    43H4-V 43H6-V
    Stack Length
    Single Single
    Wiring Units Bipolar Unipolar
    Step Angle degree 1.8° 1.8°
    Winding voltage VDC 2.33  5 12 5  12
    Current/Phase A rms 1.5  0.7  0.29 0.7 0.29
    Resistance/Phase ohms (Ω) 1.56  7.2  41.5 7.2  41.5
    Inductance/Phase mH 1.9  8.7  54 4.4  27
    Power Input Watts 7 7
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

     Size 17 Dual Motion 1.8°
    Linear Travel / Step
    Load Limit
    Order Code I.D.
    inches mm lbs n
    0.00012 0.0030* 30 133 N
    0.000125
    0.0031* 30 133 7
    0.00015625 0.0039* 30 133 P
    0.00019* 0.005 30 133 AB
    0.00024 0.0060* 30 133 K
    0.00025
    0.0063 30 133 9
    0.0003125 0.0079* 50 222 A
    0.00039*
    0.01 50 222 AC
    0.00048 0.0121* 50 222 J
    0.0005 0.0127 50 222 3
    0.000625 0.0158* 50 222 B
    0.00098* 0.025 50 222 AQ
    0.00096 0.0243* 50 222 Q
    0.00125 0.0317* 50 222 C
    0.00196*
    0.05 50 222 BH
    0.00192 0.0487* 50 222 R
    0.0025
    0.0635 50 222 Y
    0.00375 0.0953* 50 222 AG
    0.005 0.127 50 222 Z
    *Values truncated 
  • Specifications - 0.9° Single Stack (Linear or Rotary) +


    Series
    43K4-V 43K6-V
    Stack Length
    Single Single
    Wiring Units Bipolar Unipolar
    Step Angle degree 0.9° 0.9°
    Winding voltage VDC 2.33  5 12 5  12
    Current/Phase A rms 1.5  0.7  0.29 0.7 0.29
    Resistance/Phase ohms (Ω) 1.56  7.2  41.5 7.2  41.5
    Inductance/Phase mH 2.6  12  70 6  35
    Power Input Watts 7 7
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

     Size 17 Dual Motion 0.9°
    Linear Travel / Step
    Load Limit
    Order Code I.D.
    inches mm lbs n
    0.00006 0.0015* 30 133 U
    0.0000625
    0.0016* 30 133 BB
    0.000078* 0.00198* 30 133 V
    0.000098*
    0.0025 30 133 AA
    0.00012 0.0030* 30 133 N
    0.000125
    0.0031* 30 133 7
    0.000156259 0.0039* 50 222 P
    0.00019*
    0.005 50 222 AB
    0.00024 0.0060* 50 222 K
    0.00025
    0.0063* 50 222 9
    0.0003125 0.0079* 50 222 A
     0.00049* 0.0125 50 222 BG
    0.00048 0.0121* 50 222 J
    0.000625 0.0158* 50 222 B
    0.00098* 0.025 50 222 AQ
    0.00096 0.0243 50 222 Q
    0.00125 0.0317* 50 222 C
    0.001875
    0.0476* 50 222 AF
    0.0025 0.0635 50 222 Y
    *Values truncated 
  • Specifications - 1.8° Double Stack (Rotary) +


    Series
    43M4-V
    Stack Length
    Double
    Wiring Units Bipolar
    Step Angle degree 1.8°
    Winding voltage VDC 2.33  5 12 
    Current/Phase A rms 2.6  1.3 0.55
    Resistance/Phase ohms (Ω) 0.9  3.8 21.9
    Inductance/Phase mH 1.33  8.21 45.1
    Power Input Watts 10.4
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

  • Specifications - 0.9° Double Stack (Rotary) +


    Series
    43P4-V
    Stack Length
    Double
    Wiring Units Bipolar
    Step Angle degree 0.9°
    Winding voltage VDC 2.33  5 12
    Current/Phase A rms 2.6  1.3 0.55
    Resistance/Phase ohms (Ω) 0.9  3.8 21.9
    Inductance/Phase mH 1.82  11.3 58.5
    Power Input Watts 10.4
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

  • Dimensional Drawings +


    Please note: Metric numbers are for reference only.



  • Performance Curves +


    FORCE vs. PULSE RATE: Rotary Function
    Bipolar, 100% Duty Cycle




    43000 Series Linear Actuator Curves
    43000 Series Single Stack 1.8° and 0.9° degree curves in Hybrid Linear Actuators  
    43000 Series Double Stack 1.8° degree curves in Hybrid Linear Actuators

    NOTE:  All chopper drive curves were created with a 5 volt motor and a 40 volt power supply.

    Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster.  Also, deceleration can be used to stop the motor without overshoot.

    With L/R drives peak force and speeds are reduced, using a unipolar drive will yield a further 30% force reduction.

  • Wiring Diagram and Stepping Sequence +


    Hybrid Wiring
    Stepping Sequence- Hybrid Linear Actuator

    Bipolar Q2-Q3 Q1-Q4 Q6-Q7 Q5-Q8
    Unipolar Q1 Q2 Q3 Q4
    Step . . . .
    1 ON OFF ON OFF
    2 OFF ON ON OFF
    3 OFF ON OFF ON
    4 ON OFF OFF ON
    1 ON OFF ON OFF
  • Part Number Guide +



    LR

    43

    H

    H

    4

    J

    -

    05

    -

    910

    Prefix

    Series Number
    Designation

    Rotary Step Angle

    Linear Step Angle

    Coils

    1.8° Step Angle Code ID
    Resolution Travel/Step

    0.9° Step Angle Code ID Resolution Travel/Step


    Voltage


    Suffix

    LR= Linear/ Rotary

    43=43000

    H=1.8°
    K
    =0.9°

    M=1.8° Double Stack
    P=0.9°
    Double Stack

    H=1.8°
    K
    =0.9°

     

    4=Bipolar
    (4 wire)

    6=Unipolar (6 wire)



    N=.00012-in (.003)
    7=.000125-in (.0031)
    P=.00015625-in (.0039)
    AB=.00019-in (.005)
    K=.00024-in (.006)
    9=.00025-in (.0063)
    A=.0003125-in (.0079)
    AC=.00039-in (.01)
    J=.00048-in (.0121)
    3=.0005-in (.0127)
    B=.000625-in (.0158)
    AQ=.00098-in (.025)
    Q=.00096-in (.0243)
    C=0.00125-in (.0317)
    BH=.00196-in (.05)
    R=0.00192-in (.0487)
    Y=.0025-in (.0635)
    AG=.00375-in (.0953)
    Z=.005-in (.127)

    U=.00006-in (.0015)
    BB=.0000625-in (.0016)
    V=.00007825-in (.00198)
    AA=.000098-in (.0025)
    N=.00012-in (.003)
    7=.000125-in (.0031)
    P=.00015625-in (.0039)
    AB=.00019-in (.005)
    K=.00024-in (.006)
    9=.00025-in (.0063)
    A=.0003125-in (.0079)
    BG=.00049-in (.0125)
    J=.00048-in (.0121)
    B=.000625-in (.0158)
    AQ=.00098-in (.025)
    Q=.00096-in (.0243)
    C=.00125-in (.0317)
    AF=.001875-in (.0476)
    Y=.0025-in (.0635)


    05=5 VDC
    12=12VDC
    SP=Mixed Voltages Custom V available


    Example:
    910=1in (26mm)
    XXX=Proprietary suffix assigned to a specific customer application. The identifier can apply to either a standard or custom part.


    NOTE: Dashes must be included in Part Number (–) as shown above. For assistance call our Engineering Team at 203 756 7441.

      
乐优彩票天天红单下载 乐八彩票邀请码 乐优彩票网址是多少 乐优炫彩app下载 乐优彩票登入,备用,官方网址 乐优炫彩天天红单 乐优炫彩app 乐优炫彩彩票app下载 乐优炫彩app天天红单 乐优炫彩官网